Low voltage electromechanical adjustable pressure switch (max 48 Volt), Normally Open or Normally Closed contacts, electrical connection to faston 6.3 x 0.8 IP00. Key hexagonal body 24. IP65 electrical protection with CP65 protection cap supplied separately. Threaded process connections.
Read the data sheet
for the standard options available for materials and process connections.
Other possible executions based on customer requests for
quantities
The pressure switch must be installed preferably in a vertical position with electrical connection upwards. The pressure switch can be damaged in the presence of impacts and high vibrations creating false contacts. The pressure switches have no protection, can be protected with caps and connectors. The degree of protection can be IP 54 or IP65, depending on the type (IP 67 special versions). On request, special, already wired, pressure switches are manufactured, with body in acc. stainless steel, degreased for use with oxygen, gold contacts for low currents. Our technical office is available for the most suitable solution for your application. Particular attention to the external environment in which the pressure switches are installed. do not use the standard models in environments where there is a flammable atmosphere due to the presence of gas or other contaminations that could make the use dangerous. In these cases use the explosion-proof or protected versions. Our technical office is available to recommend the most suitable solution.