MANOMETERS, THERMOMETERS, THERMOWELLS

Radial pressure gauge diameter 63 Type MIRG63

General purpose pressure gauges. Bourdon tube sensitive element, diameter 63 mm. They can be used for both liquids and gaseous fluids. Scales from -1 to 1000 bar. Radial attachment. Accuracy class 1.6% fs according to EN 837-1.

Bourdon stainless steel pressure gauge Type MX-MXG

MX series dry pressure gauges. Made entirely of stainless steel, they are particularly resistant to harsh operating and environmental conditions. They are used in the chemical and petrochemical, canning, food and pharmaceutical industries. MXG series liquid filled gauges. Same instrument as the MX series but filled with liquid to reduce the stresses caused by system vibrations, pulsating pressures or water hammering. Standard stairs from -1 to 1600 bar. Radial or rear connections. direct or with bracket.

Test pressure gauge Type MP

They are used to calibrate and test industrial gauges or for precision measuremets in the laboratory; they can be used for both liquid and gaseous fluids, except for those having a high viscosity or prone to crystallisation. Each gauges is supplied with a calibration certificate issued by our lab, indicating the global error of the gauge and the references to the primary gauge use for the calibration. Nominal diameters (DN) 100, 150, 200, 250 mm. Accuracy class 0.25 (0.6 for Ø 100 and for scales from 60 to 400 mbar) according to EN 837-1.

TBX

LEO-1

The LEO1 digital manometers have a measuring interval of 5000 individual measurements per second, which allows them to record fast pressure peaks. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).

LEO-3

The LEO3 digital manometers also output the pressure values as an analog signal for display purposes and have an RS485 interface for integration in bus systems and communication with computers. The current 4...20 mA measured value is shown on the display at the same time as the pressure value. The minimum or maximum value since the last reset can also be displayed at the touch of a button. Power is supplied directly via the 4...20 mA circuit.

LEO-REC

LEO Record is an autonomous battery powered instrument with digital display designed to record pressure and temperature over long periods. LEO Record Ei is approved per IECEx for use in hazardous areas. Both the piezoresistive LEO Record as well as the capacitive LEO Record (ideal for low pressure ranges)

TF-TFL-BF-BFL

SP