BALL - CHECK AND FLOW CONTROL VALVES

high pressure ball valve Type COR

The 2/2 way high pressure ball valves are used to manually close a pressure flow in both directions. The 3/2 way versions have the function of manually diverting the flow.
They are realized for maximum pressures PN350, PN400 up to PN500 (depending on the dimensions), executions in Carbon Steel and Stainless Steel. 1/8 "to 1" 1/2 threaded connections, GAS or NPT

In line ball check valves Type FT260/6

They are inserted in branches of the circuit where the free flow
in one direction is allowed and the return flow in the opposite
direction is not possible. They are available with two different calibrations of the opening pressure 0,35 bar and 4.5 bar on request. Maximum working pressure 400 bar. Threaded connection 1/8" up to 1".  Available in Stainless steel AISI316 code FT 2260/6.

In line single-acting flow control valves Type FT257/5

Their function is to control and, if necessary, to shut-off the flow in one
direction, allowing a free return flow in the opposite direction. The spring in high-resistance material is housed in such a way that it does not close as a pack during the opening of the single-acting conical valve poppet. The check valve is calibrated at 0,5 bar. Maximum pressure working up to 400 bar. Available Stainless steel version type FT2257/5. Threaded connection 1/8" up to 2".

Cartridge single-acting flow control valves Type FT267/5

They control and, in case, shut-off the flow in one direction
and allow the full free flow in the opposite direction.
• Check valve calibrated at 0,35 bar. Maximum working pressure 320 bar. Threaded connections 1/8" up to 1". Available in stanless steel AISI316 type FT2267/5.

Cartridge double-acting flow control valves Type FT267/2

Double-acting flow control valves available from 1/8" to 1". Max.working pressure 320 Bar. Adjustable oil flow rate from 0,2 to 200 Lt./min. (depending on the size). Check valve calibrated at 0,35 bar. Maximum working pressure 320 bar. Available in stanless steel AISI316 type FT2267/2

FT257/2

In line double-acting flow control valves Type FT257/2

They allow flow control in both directions. They are equipped with a needle so to obtain: • metallic seal; • flow linearity at the opening; • accurate control for a wide range of flow rate. A double reference system made up of a decimal scale on the handle and of a keyed metal ring with graduated fractional scale and divided into sectors allows the identification of flow conditions. A locking screw in the handle ensures stable flow values preventing accidental adjustments or movements due to vibrations. A ring nut (G) is used to carry out the panel mounting, on request. On request: Versions AISI 316 code FT 2257/2. Viton seals (V). NPT Threads. Equipped with ring nuts (G). Handlewheel in ABS (mp). Lobes aluminium die-cast handwheel (RA).

Gauge isolator Type FT290

Gauge isolator for manometer available in straight and 90° configurations, threads available in 1/4" and 1/2" for straight version and 1/4" for 90° version. Operated by Nylon 66 handwheel

Gauge isolator 90° Type FT291

Gauge isolator for manometer available in straight and 90° configurations, threads available in 1/4" and 1/2" for straight version and 1/4" for 90° version. Operated by Nylon 66 handwheel